Products

Equipment

103.jpg

FireJacket Foam

FireJacket Foam

FireJacket Foam is an insulating material designed to withstand direct flame contact. It produces very low smoke and flame spread. The material develops an intumescent fire barrier which provides a protective shield against constant flame and extreme heat conduction to interior surfaces. These closed cell foams range in varing densities from 1.5-50 pcf for use in diverse fire protection system applications. FireJacket Foam is formulated as a Halogen-free, Class 1 fire rated foam containing renewable resource "Green" materials.
 
FireSkin Foam delivers toughness and dimensional stability from -20F (-29C) to 250 F (130C). It is used in a variety of construction applications such as in roof, wall and floor building insulation and structural sandwich panel construction foam core materials. These materials have been designed to accommodate HFC 245 or Pentane blowing agent for maximum R-values. This material has been designed for use in economical Continous Panel Laminator machines as shown below.

 

 

 

 FIREJACKET FOAMS PHYSICAL PROPERTIES

DENSITY (PCF)

ASTM D1622

1.5

1.75

2.0

2.5

4

6

10

 

Fire Rating

ASTM E84

Class 1

Class 1

Class 1

Class 1

Class 1

Class 1

Class 1

 

Thermal Resistance (R value)

ASTM C518

5.5

6.0

6.5

6.5

6.0

5.0

4.0

 

Compressive Strength (psi)

ASTM D1621

15

19

25

37

82

140

201

 

Shear Strength (psi)

ASTM C273

17

20

22

26

35

85

127

 

Shear Modulus

ASTM C273

207

224

231

253

312

788

1011

 

Tensile Strength (psi)

ASTM D1623

25

35

40

44

62

165

227

 

Flexual Strength (psi)

ASTM C203

40

45

50

56

123

204

312

 

Flexual Modulus

ASTM C203

164

330

522

963

2356

4785

7055

 

Water Absorption 24 hr (%vol)

ASTM D2842

<0.5

<0.5

<0.5

<0.1

<0.1

<0.1

<0.1

 

Water Vapor (perm-in)

ASTM E96

<1.0

<1.0

<1.0

<1.0

<1.0

<1.0

<1.0

 

Fungi Resistance

ASTM C 1338

None

None

None

None

None

None

None

 

Closed Cell Content (%)

ASTM D2856

>80

>85

>90

>90

>95

>95

>95

 

 

FireJacket Foam is a two component 100% solids spray formulation which does not contain VOCs. This material may require the use of a primer to obtain proper adhesion on certain substrates. All surfaces must be clean and free of contaminates and no moisture. Application temperature ranges from 50°F to 120°F. Gel Time may be adjusted to fit application. Typically, gel is 8-10 sec at 75°F with full cure in 24 hours. Use standard 1:1 high pressure plural component spray machine such as SFT-4500. Functional operation temperature ranges from -40°F to 300°F. Application spray thickness should be based on continuous build. Foam coverage  depends directly density, temperature of substrate, material and ambient conditions.

 

Buy now
103.jpg